DIN Mount Low Voltage Disconnects, 75 Amps


Product Description

The DIN-LVD-12 is pre-set to disconnect the load at 10.4 VDC. However, to prevent premature or false disconnect when the battery voltage drops below the 10.4 volt threshold a 2-minute timer is started. If the battery recovers to above 10.4 volts, the timer resets and waits. The battery can and will recover if the system is a repeater or remote base station or similar equipment that has a varying demand that fluctuates from low to high current. The 2-minute delay ensures the battery is not disconnected until necessary to prevent damage.

After the AC main power is restored and the battery is recharging, the DIN-LVD-12 will reconnect the load when the battery voltage exceeds 12.5 volts.

Product Specifications

Input Range VDC:
Disconnect / Reconnect VDC:
10.4 / 12.5
Amps (Max):
Weight (lbs):
2.75"H x 8"W x 4"D

Downloadable PDFs

© DuraComm Power Supplies. All rights reserved. | 6655 Troost Ave. • Kansas City, MO 64131
Site Created by KC Web Specialists, LLC.
Terms & Conditions  |  Privacy Policy  |  Careers  |  Partners Login