New Product

• 

  BC-LFP Series

  The BC-LFP Series Battery Chargers are designed to charge & maintain LiFePo4 batteries with an internal BMS controller only. The BC-LFP converts 108~132 VAC to the nominal regulated DC Voltage for LiFePo4 battery charging. The charger is programmed to provide Bulk Charging until the battery is near full capacity and then float charging to prevent self-discharge and maximum battery performance. NOTE: The BC-LFP is for charging LiFePo4 batteries with an internal BMS controller only. It is not for charging unprotected LiFePo batteries or any other type of battery.
• 

  LPX-18BC

  DuraComm LPX-18BC power supply is UL listed and manufactured in accordance with ISO 9001 quality assurance standards. This power supply converts 120/240VAC 50/60Hz AC power to a low noise and regulated 13.8VDC output. The unit includes a built-in battery backup and charging circuit with diode isolation for seamless transfer to battery if input AC power is disrupted. Once input power is restored, battery will be automatically charging at 1.5A. This unit contains a low voltage monitoring circuit that cuts battery power when the battery voltage reaches 10.5 ± 0.8V or below to prevent battery and load damage.
• 

  PSBC-1600NFP Series

  The PSBC-1600NFP Series are 1600 Watt rack mount battery chargers with NFPA® compliant alarms. The Smart Charger provides up to 1600 Watts DC output in 3 stages for optimal battery performance. NFPA® 1221 compliant alarming is provided by NO/NC form C contacts on the rear panel and visual LED indicators on the front. Alarms include AC fail, charger fail, 70% battery discharge, and battery fail. The PSBC-1600NFP Series is available in 12,24, & 48V Output.

  Download: Public Safety System Brochure

• 

  PSDA-MU1

  The DuraComm Annunciator provides visual and audible alarms at the installed location of a BDA in an Emergency In-Building Radio system.
• 

  PSRM Series

  The PSRM-NFP Series are 750 Watt power supplies with an integrated Battery Management System and NFPA® 1221 compliant alarms. The AC to DC rectifier provides up to 750 Watts filtered DC output. Battery charging, AC fail battery revert, and Low Voltage Disconnect are provided by an integrated Battery Management System. Alarming is provided by NO/NC form C contacts on the rear panel and visual LED indicators on the front. Alarms include AC fail, charger fail, 70% battery discharge, and battery fail. The PSRM-NFP series is available in 12, 24, & 48 VDC output.
  
  An ethernet/ web interface is included for monitoring and control of the power system and alarms (PSRM-NFPMU Series).

  Download: Public Safety System Brochure

• 

  Public Safety Power Enclosures

  Public Safety Power Enclosures are specifically designed to meet the requirements of the NFPA for mission critical and public safety DAS, BDA, and fiber systems.
  **ALL DC OUTPUT MODELS ARE UL 2524 CERTIFIED**

  - PS Series
  - PS-MU Series

  Download: Public Safety System Brochure